Any Help or Advice?
call us on 01594 544521
THE TOOLITE COMPANY
Unit 3/2 the Mews,
Brook street,Mitcheldean,
Gloucestershire,GL17 OSL

Charnwood W619 8'' Cast Iron Table Saw[CHAW619]
Charnwood W619 8'' Cast Iron Table Saw

£791.66 Exc
£949.99 Inc
Cast Iron Table Saw with an 8" diameter blade. The 2018 Model is now available with an upgraded quick action precision rip fence. Quiet Induction Motor Cast Iron Precision Ground Table Extension Tables as Standard Equipment Sliding Carriage as Standard Equipment Separate Hand wheels for Blade Adjustment Quick Action Precision Rip Fence 100mm Dust Extraction Outlet Solid Floor stand Base Included Optional Wheel Kit Available W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts. Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, 2.0m power cable and UK 3 pin plug. There are 3 ways to configure the table saw: The sliding carriage can be fitted on either side of the blade so that you can work on the left or right. If you are not using the sliding carriage, you can fit one extension table on either side of the blade. For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required. Specification Main Table Size 530mm x 1000mm Maximum Ripping Width Using Fence 730mm Crosscut Table Size 400mm x 180mm Maximum Crosscutting Width 600mm (700mm Using Reverse Table) Blade Tilt 90 - 45 degrees Cutting Depth at 90 degrees 60mm Cutting Depth at 45 degrees 47mm Blade Diameter 200mm Blade Bore 30mm Work Table Height 860mm Mitre Guide T-Slot Width 15/19mm Mitre Guide T-Slot Depth 7mm Motor (induction) 1100w (1.5hp) / 240v No-Load Blade Speed 4700 rpm Minimum Blade Width (Kerf) 2.6mm Dimensions (WxDxH) 1460 x 1010 x 1030mm Weight 90Kg


Reviews Write Review

WE ARE NOW OPEN ON SATURDAYS 10AM TILL 1PM

-

PLEASE NOTE: DO NOT ORDER ANY MASKS,GLOVES OR ANY WOOD STAIN,WAXES,WOOD DYES PAINTS OR ANYTHING FLAMMABLE AS WE ARE CURRENTLY OUT OF STOCK OF ALL & OUR SUPPLIERS CANT DELIVER DUE TO THE CORONAVIRUS THANK YOU

right_6-4
Terms & Conditions | Shipping & Delivery | Privacy Policy | Sitemap LinkedInTwitterYouTubeFacebook