Trend kwj900 worktop jig up to 900mm wide worktops

Tradesman ALL IN ONE work top jig for up to 900mm worktops.

Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius penisular joint, 45degree end cut with slight radius, 22.5 degree trade corner solution, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. Fixed lengths for 400mm, 500mm, 550mm, 600mm, 616mm, 650mm, 700mm and 900mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Engraved lines for short 65mm bolts and worktop cross-cut. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes.

Specifications
Rollover Image Length 1185mm Width 390mm Thickness 12mm Weight 7.7kg End Cut 45 degrees Corner Radius 40mm Corner Radius 100mm Corner Radius 400mm Mitre Joint 22.5 degrees